# Advance Resource Configuration

Advanced resource configuration" refers to customizing and fine-tuning various settings and parameters of a resource beyond the basic or default options, allowing for more specialized and optimized utilization in a particular context.  

## **Steps to upload Bulk resource tag /Untag:**  

* Click the ‘Bulk resource Tag / Untag’ button from the top right panel.  
* Two steps to be followed. Refer to the table below for reference.

  **Upload | Validation** 

| **Label**                                        | **Action**                                                    | **Description/ Example**                                                            |
| ------------------------------------------------ | ------------------------------------------------------------- | ----------------------------------------------------------------------------------- |
| Import Bulk Resource tag/ Untag list from a CSV  | Drag and drop the file or browse it to upload the CSV file.   | Ensure to add resource configuration details to the default file before uploading.  |

Click ‘Next’ to proceed with Validation.  

Upload | V**alidation** 

The validation tab allows users to validate uploaded CSV files and summarizes valid and invalid records. Additionally, users can download a validation report for further analysis.  

Click ‘Close’ after checking the validation.   

## **Add the filter resource**   

* Go to IT Operations -> Advanced Resource Configuration.
*    Click the ‘Add’ button at the top right of the page. For more information on adding the filter resource, refer to the table below.

<table data-header-hidden><thead><tr><th width="302"></th><th></th></tr></thead><tbody><tr><td><strong>Label</strong>  </td><td><strong>Description/ Example</strong>  </td></tr><tr><td>Name  </td><td>Add your filter name.   </td></tr><tr><td>Category  </td><td>Select the category from the drop-down.  </td></tr><tr><td>Condition  </td><td>As per the selected category select the condition from the drop-down.   </td></tr></tbody></table>

Bulk Resource Tag/ Untag categories are mentioned below: &#x20;

<table data-header-hidden><thead><tr><th width="225"></th><th></th><th></th></tr></thead><tbody><tr><td><strong>Label</strong>  </td><td><strong>Conditions</strong>  </td><td><strong>Value</strong>  </td></tr><tr><td>Resource Name  </td><td>Contains, Equal to. Mention the value in the given space.  </td><td>  </td></tr><tr><td>Resource Description  </td><td>Contains, Equal to. Mention the value in the given space.  </td><td>  </td></tr><tr><td>Resource Alias  </td><td>Contains, Equal to. Mention the value in the given space.  </td><td>  </td></tr><tr><td>Resource Type  </td><td>Contains, Equal to, and IN. Mention the value in the given space.  </td><td>If ‘IN’ is selected, chose the value from the drop-down such as device, disk, Ethernet, Gigabit Ethernet, Hypervisor Host Machine, Hypervisor Snapshot, Hypervisor staorage, Hypervisor virtual machine, Hypervisor virtual machine disk, INode, Interface, Link aggregate, LogicalDisk, Loop back, Memory, Networkinterface, PPP, Processor, Prop Virtaul, system, tunnel and others.   </td></tr><tr><td>Device IP Address  </td><td>Contains, Equal to. Mention the value in the given space.  </td><td>  </td></tr><tr><td>Device Hostname  </td><td>Contains, Equal to. Mention the value in the given space.  </td><td>  </td></tr><tr><td>Polling Status  </td><td>IN. Mention the value in the given space.  </td><td>Choose the value from the drop-down either active or Inactive.  </td></tr><tr><td>Resource tag  </td><td>IN. Mention the value in the given space.  </td><td>Choose the value from the drop-down such as Device, Node, NOC  </td></tr><tr><td>Poll profile  </td><td>Contains, Equal to, and IN. Mention the value in the given space.  </td><td>If ‘IN’ is selected, choose one or more values from the drop-down such as CiscoDevice.cfg, device.cfg, esxihost.cfg, esxihoststorage.cfg, esxisnapshot.cfg, esxivmdisk.cfg, esxivmstat.cfg, ifmib.cfg, juniperexdevice.cfg, mib2if.cfg, ssgDevice.cfg, ssgDisk.cfg, sshlnode.cfg, sshInterface.cfg, sshMemory.cfg, StatusIf.cfg, wmi_PerfFormattedData_PerFOS_Memory.cfg, wmi_PerFormattedData_PerFOS_Processor.cfg, wmi_PerfFormattedData_PerfOS_system.cfg, wmi_PerfRawData_PerfDisk_LogicalDisk.cfg, wmi_PerfRawData_Tcpip_NetworkInterface.cfg  </td></tr><tr><td>Asset Tags  </td><td>IN. Mention the value in the given space.  </td><td>If ‘IN’ is selected, choose one or more values from the drop-down such as IT- Asset, IT-asset, Samsung, TAG1, Windows, Core, noc, and more.   </td></tr></tbody></table>

Click ‘Cancel’ to cancel the filter resource created. To save click ‘Save and Proceed’ button.  &#x20;

### **Configure the Advanced Resource Configuration** &#x20;

* Go to Infraon Configuration -> IT Operations -> Advanced Resource Configuration. &#x20;
* Click the ‘Configure’ icon under the action tab. &#x20;

Click the ‘Action’ button on the top right of the page and select the actions from the drop-down such as: &#x20;

1. **Tag:** Select Tag from the drop-down and click the ‘Submit’ button. &#x20;
2. **Enable Polling:** Click ‘Enable polling’ when the pop-up appears.  &#x20;
3. **Disable polling:** Click ‘Disable polling’ when the pop-up appears. &#x20;
4. **Change poll period:** Mention the poll period in the given space and click the ‘submit’ button. &#x20;

{% hint style="info" %}
To Export the configuration, click on the 'Export' icon at the page’s top right corner. &#x20;
{% endhint %}