Network Discovery

Network discovery uses SNMP protocols to discover all network devices, such as hubs, modems, printers, switches, routers, bridges, and access points.

Initiate Network Discovery

There are three tabs on the 'Network Discovery' page.

Discovery Details | Filters | Schedule

Label	Action	Description/Example
Profile Name*	Add a name for the Discovery Profile. Discovery Profiles are created to save preferences and identify profiles to track and initiate discovery periodically.	The name of the profile helps identify the profile.
Discovery Options	There is two options for discovery. Choose the option that suits your requirements.	1. Discover inventory with availability and performance monitoring. 2. Discover only Inventory Information. 3. Discover inventory with availability and performance monitoring.
Provide Profile Details	Add a brief description of the discovery profile.	For example, For network devices, Routers & Switches only, etc.
IP Address*	Type IP, IP range, or Subnet IP to be discovered.	You can choose to import from a CSV file too.
Import from CSV	Import device list from a CSV.	This is an alternate option to adding the IP, IP range, or subnet.
Configuration Download	Click the toggle button to make changes	Click here to access the detailed Configuration job content and manage your network jobs effectively.
Device Credentials	Select the relevant device credential using the dropdown menu.	Device Credentials must be pre-configured for selection.
Add to NCCM	Select the toggle button to make changes	Discovered network devices are automatically added to NCCM for management, backup, change, compliance, and monitoring.
Agent Details*	Click the 'Pick Agents Here' button to add the agent details.	Infraon agent collects data from devices configured for discovery. It can support SSH, SNMP, WMI, etc.

* Fields are mandatory.

Note: 'Import from CSV' and 'Device Credentials' are optional. You can click the 'Next' button without adding any details to them.

Discovery Details | Configuration Download | Details

Profile Details:

• Select Configuration profile (only if the Range of Input Devices can have the same profile to manage) or keep it as ‘Select Configuration Profile.’ NCCM will automatically find the right Profile for each device during discovery.

Protocols:

• Select the Connection protocol (for all the Range of Input Devices that can have the same Connection protocol), or NCCM will automatically set the default connection Protocol from System Parameters.

• Select the Configuration Download protocol (for all the Range of Input Devices that can have the same Configuration Download protocol), or NCCM will automatically set the default Download Protocol from System Parameters.

• Select the Other configuration Download protocol (for all the Range of Input Devices that can have the same Other configuration Download protocol), or NCCM will automatically set the default Other configuration Download Protocol from System Parameters.

• Select the Inventory Download protocol (for all the Range of Input Devices that can have the same protocol), or NCCM will automatically set the default Inventory Download Protocol from System Parameters.

• Select OS Image Download Protocol (for all the Range of Input Devices that can have the same OS Download protocol), or NCCM will automatically set the default OS Download Protocol from System Parameters.

Schedule Download:

For a Discovery Schedule, refer to the table.

Label	Action
Schedule Mode	Click the discovery schedule mode at once, every, daily, weekly, or monthly.
At	Click the calendar icon to add the date and time to the next column.

Click 'Next' to add details on 'Filters.'

Discovery Details | Filters | Schedule

Filters have two sections: Device Filters and Network Component Filters.

Device Filters | Network Component Filters

Label	Action
Device Filters	Click the first condition box to add either include or exclude devices.
Include Devices/ Exclude Devices	You may include or exclude IP Address, Device Type, or Device Name.

Choose the condition to suit your requirements. You may add additional conditions using the + icon.  Move to add network component filters.

Device Filters | Network Component Filters 

Label	Action
Interface	Enable or disable the 'Interface' button.
Interface Type	Add Interface Type from the drop-down menu.
Interface Name	Add the Interface Name from the drop-down menu.
Sub Interface	Enable or disable the 'Sub Interface' button.
Sub Interface Monitoring	Add Sub Interface Monitoring details from the drop-down menu.
STP	Enable or disable the 'STP Monitoring' button.
BGP	Enable or disable the 'BGP Monitoring' button.
OSPF	Enable or disable the 'OSPF Monitoring' button.
EIGRP	Enable or disable the 'EIGRP Monitoring' button.
QoS	Enable or disable the 'QoS Monitoring' button.
Jitter	Enable or disable the 'Jitter Monitoring' button.
VRF	Enable or disable the 'VRF Monitoring' button.
VLAN	Enable or disable the 'VLAN Monitoring' button.
IPSec	Enable or disable the 'IPSec Monitoring' button.
Wireless Controller	Enable or disable the 'Wireless Controller Monitoring' button.
VPC & VDC	Enable or disable the 'VPC & VDC Monitoring' button.
Host	Enable or disable the 'Host Monitoring' button.

Note: The 'Filters' tab is optional. You can click the 'Next' button without adding details on Filters. 

Once done, click 'Next' to add details 'Schedule.'

Discovery Details | Filters | Schedule 

There are two scheduling options: 'Discovery Now' or a 'Discovery schedule' time.

If you enable the button on 'Discovery Now,' the discovery will occur from the current time.

For a Discovery Schedule, refer to the table.

Label	Action
Schedule Mode	Click the discovery schedule mode at once, every, daily, weekly or monthly button.
At	Click the calendar icon to add the date and time to the next column.

After adding details to 'Discovery Schedule,' click 'Submit' to initiate the 'Network Discovery.

Note: The 'Discovery Schedule' section is optional. By default, it will enable the 'Discover Now' button.