Trap Configuration

Used to configure Traps to trigger the Event(s). It's a crucial feature that allows you to fine-tune how automated alerts, called Traps, are generated and sent in response to specific system Events.

These are primarily used to capture or handle events or signals that occur within a system.

Instruction to add a Trap Configuration

Go to Infraon Configuration -> IT Operations -> Trap Configuration and click the ‘New Profile’ button.

What you see on the screen

Trap Configuration | Basic Detail |

Label	Action	Description/Example
Profile name	Add a name for the credential	Applicable for all protocols. A name is usually used as an identifier.
Description	Add a brief description of the profile	Applicable for all protocols
Trap OID	Add a Trap OID (Object Identifier)	The trap message contains the time, an identifier, and a value.
Status	Select the status of the configuration.	The status of the configuration can be Active or In-Active.
Type	Select the type using the drop-down menu.
Severity	Select severity using the dropdown.	Available options are critical, major, and minor.
Bind Resource Type
Resource Varbind
Alarm Message	Add a message for the configuration.	This message will be included in the trap configuration alarm/notification.
Clear Message	Add a message for the trap configuration.	This message will be included in the trap configuration alarm/notification.

Enter the details and then click "Submit" to proceed.